What Are Radio Waves?
AM stands for Amplitude Modulation, and FM stands for Frequency Modulation. Both AM and FM radio programs are transmitted over the air via radio waves, which are part of a range of electromagnetic waves that include gamma rays, x-rays, ultraviolet rays, visible light, infrared, and microwave. Electromagnetic waves are all around, everywhere, at different frequencies. Radio waves have properties similar to light waves (such as reflection, polarization, diffraction, and refraction), but radio waves exist at a frequency that your eyes aren’t sensitive to. Electromagnetic waves are generated by alternating current (AC), the electrical power used to run most of the technology in your home and life, from washing machines to televisions to mobile devices. In the United States, alternating current operates at 120 volts at 60 Hz. This means that the current alternates (changes direction) in the wire 60 times per second. Other countries use 50 Hz as the standard. Although both 50 and 60 Hz are considered relatively low frequencies, the alternating currents generate a basic level of electromagnetic radiation (EMR). This means some of the electric energy escapes the wire and is transmitted into the air.
The Concept of Modulation
Electricity in the air is random noise. To be turned into useful signals that transmit information (music or voice), electricity must first be modulated. Therefore, modulation is the basis for AM and FM radio signals. Another word for modulation is change. Electromagnetic radiation must be modulated or changed to be useful as a radio transmission. Without modulation, a radio signal can’t carry information. When it comes to radio broadcasts, the electromagnetic radiation (electricity in the air) must be modulated with the information to be sent.
AM Radio Broadcasts
AM radio uses amplitude modulation, the simplest radio broadcast form. To understand amplitude modulation, think about a steady signal (or wave) broadcasting at 1,000 kHz on the AM band. The constant signal’s amplitude (or height) is unchanged, or unmodulated, so it doesn’t carry any useful information. This steady signal produces only noise until it’s modulated with information, such as voice or music. This modulation results in a change to the steady signal’s amplitude strength, which increases and decreases in direct proportion to the information. Only the amplitude changes. The frequency remains constant. AM radio in the Americas operates in a range of frequencies from 520 kHz to 1,710 kHz. Other countries and regions have different frequency ranges. The specific frequency is known as the carrier frequency, which is the vehicle by which the actual signal is carried from a broadcast antenna to a receiving tuner. AM radio transmits over greater distances. It has more stations in a given frequency range and can be picked up easily by receivers. But AM signals are more susceptible to noise and static interference, such as during a thunderstorm. The electricity generated by lightning produces noise spikes that AM tuners pick up.
FM Radio Broadcasts
FM radio uses frequency modulation. To understand frequency modulation, consider a signal with a steady frequency and amplitude. The signal’s frequency is unchanged or unmodulated, so there’s no useful information contained. When you introduce information to this signal, there’s a change to the frequency directly proportional to the information. When the frequency is modulated between low and high, the carrier frequency is transmitting music or voice. Only the frequency changes as a result. The amplitude remains constant the entire time. FM radio operates in the 87.5 MHz to 108.0 MHz range, a higher frequency range than AM radio. The distance range for FM transmissions is more limited than AM, usually less than 100 miles. However, FM radio is better suited for music. The higher bandwidth range of 30 Hz to 15 kHz produces the sound quality we enjoy and prefer. To have a greater coverage area, FM transmissions need additional stations to carry signals further. FM broadcasts are commonly done in stereo (a few AM stations can also broadcast stereo signals). Although FM signals are less susceptible to noise and interference, physical barriers, such as buildings and hills, can limit them and impact overall reception.
